WEC Water Tank Level Indicator with 6 Sensors

WEC Water Tank Level Indicator with 6 Sensors

The WEC water tank level indicator monitors water levels in tanks using six sensors and provides a control output that can be used with a compatible pump or alarm, depending on the wiring setup.

Technical Specifications

How It Works

The sensors are installed at different levels inside the tank, and the unit displays the level at the sensor positions. When the water reaches a configured level, the control output can operate a connected load, such as a pump or alarm, according to the wiring arrangement.

Installation

• Install the sensors at different levels inside the tank.
• Sensors may be mounted on a suitable PVC pipe or support.
• Connect the sensors to the display and control unit using the supplied cables.
• Install the display/control unit outside the tank.
• Follow the wiring diagram supplied with the device.

Important Notes

• Verify all connections against the device wiring diagram before powering the unit.
• The control output is rated for loads up to 1.5 kW. Higher loads require an appropriate external control device, such as a contactor.
• Protect electrical connections from moisture.